Tile flashing
Every penetration and wall joint is flashed to handle the deep curves of tile.
Tile Roofing
Tile Roof Installation Cliffside Park, NJ
A roofer in Cliffside Park can install a clay or concrete tile roof, starting with a check that the framing can carry the weight and finishing with the flashing, ridge and eave details that keep it dry. Call (551) 378-0042 to reach a local roofer who installs tile.
Tile is one of the heaviest roofing materials a house can carry, so a tile roof installation starts below the roof. Because tile is so heavy, homes converting from shingles usually need the framing checked, and some need reinforcement first. New homes designed for tile have the load built in from the start.
Then comes choosing the tile itself. Clay tile is fired, keeps its color for a very long time and is lighter than most concrete tile, while concrete tile comes in many profiles and slowly fades as its surface weathers. Profiles run from flat tiles that look like slate or shakes to S-shaped tile and two-piece barrel tile.
The tile may last generations, but the layers below it decide when the roof leaks. Most tile needs a slope of at least 2.5 in 12, and building codes call for a doubled underlayment on slopes below 4 in 12. Investing in the underlayment up front is what lets the tile live out its full life.
If the problem goes deeper than it first looked, a Cliffside Park roofer may also recommend tile roof replacement or roof installation.
Looking for Cliffside Park tile roof installation? Call (551) 378-0042 to talk to a local roofer.
Call nowThe process
The tile roof installation process
Here is how a roofer usually installs a tile roof.
Plan for the load
The roofer confirms the framing can carry the tile, often with an engineer when a home is switching from shingles, and pulls the permit the job needs. It is smart to keep a stack of spare tile from the same batch for future repairs.
Lay the underlayment
The deck gets edge metal and underlayment, from heavy felt to synthetic or self-adhered membrane, lapped so water runs over each seam. Since this layer does the waterproofing, it is where quality matters most.
Install battens
Battens run horizontally to hold each course of tile, often raised on counter battens to leave a drainage and air space below. The gap under the tile also helps heat escape before it reaches the deck.
Flash the details
Flashing goes in at valleys, sidewalls, headwalls, skylights and pipes, sized for the deep profile of tile. Flashing for tile is built for the depth of the tile, which is why shingle flashing details do not carry over.
Fasten each course
Tile goes on from the eave up, with an eave closure to keep birds out and fasteners or foam adhesive chosen for local wind requirements. Cut tiles at hips and valleys are fastened too, since small pieces are the first to blow off.
Finish the ridge
The ridge is finished with caps over a ridge board, set in mortar or fastened dry with a breathable closure. Before the crew packs up, cracked pieces are swapped out.
What is included
Parts of a tile roof installation
Eave closures
Bird stops close the eave and caps seal the ridge so birds and wind-driven rain stay out.
Tile attachment
Tile is fastened with nails, screws, clips or adhesive so tiles stay put in strong wind.
Load check
An engineer or span check confirms the structure so the roof does not sag over time.
Waterproof layer
The deck is covered with underlayment suited to the slope as the real barrier against water.
Related service
Barrel Tile Roof Installation Cliffside Park, NJ
Barrel tile is the classic two-piece tile roof: half-round pan tiles laid concave side up, with cover tiles laid over the joints between them. Each tapered tile overlaps the one below it, and the deep shape throws the strong shadow lines that give the roof its look. Because of that depth, barrel tile needs careful work at the eaves, hips and ridges, where the open curves must be closed off.
For barrel tile installation on a Cliffside Park home, each cover tile is secured with nails, wire ties, clips or foam adhesive, depending on the slope and wind rules. Straight, evenly spaced rows take chalk lines and patience on the deck.
Related service
Spanish Tile Roof Installation Cliffside Park, NJ
Most Spanish tile today is one-piece S tile, which mimics the classic two-piece look while going on faster. Both clay and concrete versions are made, in solid colors or blends from deep red to earth tones. Its interlocking side laps shed water well, but the curved ends at eaves and ridges still need closing off.
Spanish tile roof installation in Cliffside Park follows the same system as any tile roof, from structure check to underlayment, flashing and tile. Flashing around chimneys, walls and skylights has to be shaped to the S curve, often with formed metal or a flexible flashing material. With a color blend, tile is drawn from several pallets as it goes up so no area looks patchy.
Local help
Tile Roof Installation Near Me
Around Cliffside Park, tile is installed on new construction designed for its weight and on existing homes being upgraded. For older homes in Cliffside Park and nearby towns like Edgewater, Fairview, Ridgefield and Palisades Park, the framing check is the step that decides whether tile is practical, while homes already built for tile can usually go straight to choosing a profile and color.
Searching for tile roof installation near me from Cliffside Park or Edgewater, Fairview, Ridgefield and Palisades Park? Call (551) 378-0042 to talk to a roofer who works in your part of town.
Roofs in this climate
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. That is why roof repair in Cliffside Park is busiest after a hard winter and before the next one.
Why call
Why act early
Drier ceilings
Small roof problems caught early usually stay small repairs.
Roofers who know Cliffside Park
Roofers in Cliffside Park know the roof types and weather wear common in local homes.
Clear next steps
Ask your questions before you agree to anything.
Tile Roof Installation questions
How long does tile roof installation take?
Expect more time than a shingle job, since each tile is placed and fastened by hand over more layers. Steep pitches, many hips and valleys and a structural upgrade all add time. Once the underlayment is down, the house is protected from rain while tile goes on.
What is better, clay or concrete tile?
Both make durable roofs with different tradeoffs. Clay tile resists fading and has lasted a century or more on some older buildings. Concrete is sturdy and widely available, though it absorbs more moisture and its surface weathers with age.
How heavy is a tile roof?
Clay and concrete tile are among the heaviest roof coverings, several times the weight of shingles. Homes built for tile carry it fine, but a house framed for shingles may need an engineer to check the rafters or trusses and add reinforcement. Some lighter weight tile products are made for homes with less structural capacity.
What underlayment goes under a tile roof?
The common choices are felt, synthetic underlayment and self-adhered membrane. Since the tile can outlast the underlayment by decades, a longer lasting underlayment pays off. Codes call for two layers on slopes from 2.5 in 12 up to 4 in 12.
Can tile be installed over an existing roof?
Tile goes onto a clean deck, so the old roof comes off first. Tear-off exposes the decking so rotted boards can be replaced and the new underlayment can lap correctly.
More questions? Call (551) 378-0042
Other services that may help
Tile Roof Replacement
Tile roof replacement that strips the roof to the deck, renews the underlayment and flashing and puts sound tile back on, with salvage of good tile wherever it makes sense.
Learn moreRoof Installation
Putting on a new roof the way the material maker intends, whether it is asphalt shingles, metal or another material.
Learn moreTile Roof Inspection
A close look at the tile, underlayment, flashing, valleys and attic of a clay or concrete tile roof, before buying a home, after a storm or as the underlayment ages.
Learn moreRoof Ventilation
Roof ventilation work that keeps the attic dry in winter and cooler in summer, based on what the attic actually needs.
Learn more
Looking for something else?
See all roofing servicesGet tile roof installation help in Cliffside Park
Call (551) 378-0042 to talk to a roofer serving Cliffside Park, NJ.